Perspectives of a Writer and Musician

Issues related to writing, publishing and playing jazz music: One man's muse.
by Al Stevens

My Photo
Name:
Location: Florida, United States

Wednesday, April 22, 2009

Paper mache

I'm working on two replica projects. I had the original figures in my workshop last year and made rtv molds of the heads for owner insurance. The owners want copies, so I am casting shells.

The rotocaster approach won't work because neither mold is rotocaster-friendly. They are in two halves each, designed to be cast as front and back halves independently.

I would like to avoid the toxic chemicals associated with urethane and fiberglass. And I am alergic to MagicSculp and Epoxy Sculpt. So I decided to use paper mache.

I have some experience casting in paper mache. I built Renfield that way several years ago.

Rather than go through the tedious and messy paper strip and glue routine, I tried some of those products from the craft store that are supposed to be good substitutes. Forget it. The most promising such product was Paperclay. It must be good for something, but it is unsuitable for casting shells from molds. The medium shrinks as it sets up and pulls away from the mold and from itself. Also it is very expensive.

So, I reverted to the old tried and true method. Newspaper strips and a 50-50 mix of Elmer's white glue and water. Cheap, strong, lightweight. But time-consuming and messy.

A paper mache cast needs several layers. To make it easier to keep track of where I have applied strips in subsequent layers, I always alternated between black and white newsprint and the Sunday comics.

Guess what? Our prestigious local newspaper, Florida Today, does not have a Sunday comics section. A sign of the economy? Or the declining tastes of the current generation? Whatever. I used car advertisement pages instead which are plentiful and colorful.

But guess what? The news sections have lots of color pictures, too. Eye candy for that generation that needs instant gratification and can't be bothered to actually read words, I suppose. I had to use the financial section to get strips of paper that I could distinguish from the car ads.

My parents and grandparents used to grouse about the younger generation, my generation. They were wrong.

Thursday, April 09, 2009

Preparation for a show

The subject of preparation for a show was recently raised on the Worldvents discussion group. As I began to address it, I realized that my answer was becoming a candidate for a blog article. So here it is.

There are different approaches to the issues of how you prepare for a show and how you deal with your patrons before the show.

My preparation is probably less conventional than that for most vents because I combine comedy with music. I typically perform as a musician with a house band. The first set is music. The second set is comedy.

Setup
Setup is easy for the vent part. It has to be. I have several different instruments to unpack, tune, and put in place on the bandstand. That takes most of my setup time.

For vent, I have a rollaround case that Clinton Detweiler built to my specifications. It contains everything I need for the vent part of the show. Clinton did the case itself. I build inserts from thin plywood to hold my stuff in place.



The figures and other items travel in the case ready to be pulled out during a performance. They are held in place for traveling with Velcro straps, which I release before the show starts. The figures sit on small shelves in the case.

The case stays either onstage if there is room for it and elsewhere nearby if there is not. It holds three hard figures and the performance stand. (I rarely use props.) Setup involves finding a place for it, rolling it from the car into place, and removing and storing the lid. If the case has to be offstage or backstage, I roll it onstage at the beginning of the show, usually during intermission before the comedy set. If a bandstand has no room for the case at all, which often happens, I go to and from the case wherever it is between figures.

When I want to use a figure, I reach in from behind the case and pull the figure out and sit it on the stand. When I am finished with the figure, I put it back on its shelf.

My original design for the case made it just tall enough that it could be the performance stand, too. Because so many venues don't have room onstage for it to be next to me, I abandoned that idea and opted instead for the additional storage space I got by making it a little taller.

For shows that are comedy only and don't involve a house band and don't have house sound, I take my own sound system, which I set up before the party begins.

Mingling
As a musician, I cannot avoid it. It's a different dynamic than comedy. It involves taking breaks, going to the bar, talking to the patrons, selling CDs, etc. Those venues are usually saloons, the patrons are mostly strangers to one another, and I wear normal clothes to perform--nothing flashy to signal, "Clown!"--so I can blend in before showtime if there is no green room to hide out in.

For comedy only, I stay out of sight until I am announced. If it's a corporate group, I've already learned from the planner who I can mention during the show and what I need to know about them.

I don't call volunteers onstage, so that is not a concern.

For comedy and jazz club type shows, I just pick on people nearest to me with generic putdowns or flirtations from the dummy.

Dinner
If dinner is included, I ask to be served in the green room. If eating with the guests is unavoidable, I try to blend in and be nondescript. That's not always easy because in many situations they saw my promo picture and know that I am not one of their group. If they ask what I do, I just say, "I'm in the show." If they push it, I say, "It's a surprise."

Mental Preparation
I don't do anything to psych myself up. No meditation, yoga, or anything other-worldly like that. I try to completely forget about the show's content the day of the show from the time I get out of bed in the morning until I am announced onstage. If I don't know it by then, I never will.

Before going onstage, I take a peek at the audience. I pick out someone to play to, usually a pretty girl or an elderly person.

Friday, April 03, 2009

Welcome to my world

This thing greets me in my workshop each morning.



No, it's not a mummy puppet or even a dead terrorist. It's an armature, the skeleton, so to speak, of a clay sculpture. I needed the clay for something else. This is what remains of the genesis of a couple of the figures I built over the past several years.

I kind of like it.